Carbide Insert Tools

• For model 8922 combo lathes. 
• Use when turning thin non vented import rotors with hubs.
• Uses insert # 407

• Right hand assembly for 3000, 4000, 4100, 7000.
• Complete with insert # 062 and screw

• Left hand assembly as above

• Kit includes 1 each of #191, 192

• For older 3000, 4000, 4100, 7700 lathes. 
• Can be updated with #782 toolholder. 
• Complete with #205 insert and screw.

• For models 3000, 4000, 4100, 7700. 
• Small drum turning tool complete with # 103 insert and screw.

• For models 3000, 4000, 4100, 7700. 
• Used on old style single sided cutters and 5392 small drum   cutters. 
• Double end disc toolholder. 
• Cars and light/medium trucks.

• For models 3000, 4000, 4100 7700.  
• Right hand negative rake toolholder. 
• Complete with # 062 insert and screw.

• Model 5000 lathe for trucks. 
• Used with #6875 flywheel facing set. 
• Complete with 2 #373 inserts and screws

• Right hand tool. 
• Complete  with # 062 insert and screw

• Left hand tool.  As above.

• Right hand tool complete with #407 insert and screw.

• Left hand tool.  As above

• Right hand tool. 
• Designed to fit an AMMCO, FMC or KWIK-WAY.
• Used on import hubs with wheel mounting flange on rotor.
• Complete with insert #407 and screw.

• Left hand tool as above.

• Right hand tool.
• For lathe #SDL and SD.
• Complete with insert #802 and screw.

• Left hand toolholder as above.

• Right hand toolholder used on KWIK=LATHE and 
    LINE-O-TRONICS. 
• Complete with #802 insert and screw.

• Left hand toolholder as above.