www.FMSIinc.com - Automotive Hardware - Plastic & Headlamp Cleaning Kit

	FMSI Automotive Hardware Inc. - Problem Solving Automotive Repair Hardware
	Phone 1-800-651-7445 Fax 1-519-822-0520 Email: info@fmsiinc.com
	1070 Heritage Road, Burlington, Ontario, Canada, L7L 4X9
	Home \| Transmission \| Brake System \| Fuel System \| Electrical \| Hardware \| Door Pins \| A/C \| Search \| Videos




Problem:	Discolored Headlamp Lens Cover
	Most vehicles now have a protective, transparent, plastic lens covering the headlights. These lenses protect expensive lamps from flying stones and road debris but they discolor over time. Becoming opaque and cloudy, these lens can severely restrict the amount of light reaching the road. This clouding is caused by accumulated exposure to ultraviolet light. This discoloration can become noticeable in as little as 2 years. The headlamp lens are replaceable only with an assembly, some of them costing in excess of $600.00 retail.



Solution:	Our Plastic & Headlamp Cleaning Kit
	10 Minute Solution! Our kit will repair the headlamp lens to a useable state in about 10 minutes time. There are two kits available, the retail kit to do one or two vehicles (200 sq in coverage) and the professional kit (2500 sq in coverage). Why use sandpaper or rubbing compound that leave scratches?

	Step by Step Procedure:	Video Demonstration
Step 1:	Spread the polish on the headlamp. Use about as much as a "loonie" would cover. Too much polish makes it difficult to "buff" it all off. It's easier to do two small applications if necessary.	Video Demonstration (2 minutes)

Step 2:	Use the buffing ball on your drill to smear the polish evenly over the headlamp applying a minimal amount of pressure. Gradually increase the pressure on the ball to polish the headlamp to its desired finish.

For the Professional Kit that includes Wax and Micro-Fibre Cloth:

Step 3:	Apply the wax to a wet cloth and wipe it onto the headlamp. Let the wax dry completely then using the other ball in the professional kit, buff the wax off to attain a glossy finish.

Step 4:	Use the micro-fibre cloth to remove any remaining haze.

Where can it be used?

What are the applications?

	Should yield 200 sq. in. of plastic cleaning. Contains: 1 - Metal Polish 50gr/1.76oz tube 1 - Polishing and Buffing Ball (Drill not included)
Retail Kit

	Should yield 2500 sq. in. of plastic cleaning. Contains: 1 - Metal Polish 32oz can 1 - Wax Protectant 32oz bottle 1 - Microfiber Polishing Cloth 2 - Polishing & Buffing Balls (drill not included)
Professional Kit

FMSI Automotive Hardware - Problem Solving Automotive Repair Hardware

Phone 1-800-651-7445 Fax 1-519-822-0520 Email: info@fmsiinc.com

1070 Heritage Road, Burlington, Ontario, Canada, L7L 4X9


Before	After